MSA FiveStar Instruction Manual download pdf (Page 22)

• When the selected date has been

accepted, the (FIGURE 2-14)

display appears.

NOTE: The instrument is equipped

with a small battery to

retain time settings when

the battery pack is detached.

If your instrument does not

maintain the proper time

consistently, return it to your

nearest Service Center

to have this battery replaced.

The instrument then prompts the user

to determine if they want to view the

instrument alarm setpoints.

• The (FIGURE 2-15) display appears.

• If PAGE (NO) is pressed (or if no

button is pressed within five

seconds), the setup is complete.

• If RESET (YES) is pressed, the

instrument steps through the

alarm screens [to view these

screens, see the FiveStar

Technical Manual (P/N 710440)].

Once alarm viewing is complete:

• The alarm sounds briefly

• The (FIGURE 2-16) display appears.

• The instrument now automatically

turns ON and runs through the

following procedure for normal instrument turn-on.

Turning ON the FiveStar Alarm

Push the ON/OFF button.

• The backlight flashes

• The screen flashes

• The alarm sounds

• The alarm lights flash.

Figure 2-14.

Date Set Complete

Figure 2-15.

Show Alarms?

Figure 2-16.

Setup Complete

Chapter 2, Using the FiveStar Alarm Instruction Manual

2-6 FiveStar Alarm

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 70 71

Comments to this Manuals

No comments

MSA FiveStar Instruction Manual Page 22

Comments to this Manuals

Related products and manuals for Carbon monoxide (CO) detectors MSA FiveStar